Installation of flat interpanel clamp P-1

1. The kit for installing the flat interpanel clamp R-1 includes:

• flat interpanel clamp - 1 pc;
• bolt M8*50-65 (depending on the thickness of the solar panel) - 1 pc;
• nut M8 DIN6923.

2. Insert the bolt head into the upper slot of the profile and pull it along the slot to the edge of the solar panel.

3. Place the second solar panel next to it so that the bolt leg is between the two adjacent photovoltaic modules.

4. Insert the bolt leg into the clamp hole. Align the photovoltaic module so that the frames of the adjacent modules rest against the limiting protrusion on the lower part of the flat clamp.

5. Screw the nut onto the bolt while holding the solar panel. Make sure the modules are lying parallel to each other.